Frequently Asked Questions About Using Work Shoes
These shoe models must be used in accordance with their intended purpose. When wearing and taking off steel-toed work shoes, the laces must be untied, and for laceless models, shoehorns should be used. Safety and work shoes should always be tried on for the left and right foot when they are at their maximum swelling point, and shoes that pinch the feet should absolutely not be purchased. Make sure these shoes are the correct size for your feet, and shoes that are too small or too large will cause undesirable problems such as deformation and lining tears. These shoes should never be kept or stored in damp and humid areas. Models with synthetic materials in their inner linings may cause odor on the feet and absorb water. The sweat absorbed by work shoes begins to evaporate within 24 hours, and for this reason, it is recommended to wear the shoes with a one-day interval. The main reason for this is to ensure that the shoes have a longer lifespan. Stains that may occur on the shoes due to excessive foot sweating in models and other designs, which cannot be removed, are not manufacturing defects. Leather work shoe models should be polished with their own colored dyes or natural waxes, and in shoe models without lining, the colors of the leather may transfer to the feet and socks.
How to Store Work Shoes
Shoe models must be aired out before storing to prevent odors and shoe trees should be used to prevent deformation. At the same time, it is natural for water to seep into shoe models with upper hand stitching at the stitching points, where the sole and side parts meet the leather. Work shoes can be comfortably used for approximately 5 years due to their quality and special construction. However, they must be stored and protected in the most appropriate way during periods of non-use and within these times. To maintain the shape of these steel-toed work shoe models, you should fill them with wooden shoe trees or paper such as newspapers. If cracks are forming on the leather parts of the shoe models and you do not want them to occur, you must place a wooden shoe tree inside the shoe. You must store them in cool and dry environments.
