How to Use Wallpaper Decoration Tips

How to Use Wallpaper Decoration Tips

Changing Your Home's Atmosphere is in Your Hands

My home, my beautiful home. As we pondered how to make it more beautiful, wallpaper came to mind. After all, isn't wallpaper a decorative product? After finishing the covering, let's clean the excess at the bottom of the walls and on the floor with a straight edge and a utility knife. After the entire application, do not open the windows for 24 hours and wait for the wallpaper to dry completely. That's all from us, good luck to you...

Changing Starts with Wallpaper

Measure the designated area at three points and measure the parallelism of the ceiling to the floor so that we don't encounter any surprises during the application process. We've got our beautiful wallpapers and we're starting now. Make sure the area where you will apply the wallpaper has a smooth surface. If your wall has minor imperfections, be sure to sand it and smooth out any problematic paint or plaster pieces that might create bumps. Even better, if possible, apply satin paint or primer to the area where the wallpaper will be applied. This will make your job even easier. Then, unroll one of the rolls to check its dimensions and, if you are using two patterns, check the pattern. The rolls of wallpaper you purchased already contain the necessary details and preliminary information on how to use them. Pay attention to these warnings. After measuring the wallpaper to be applied and completing all necessary checks, apply the wallpaper from the ceiling downwards, applying the adhesive to the back, and go over it with a clean sponge to ensure it adheres well. Wait for 1 to 1.5 hours after finishing two rolls and check if there are any problems with the applied wallpaper. Wallpaper should be started from the wall that receives sunlight, and the radiators should not be on during this time. After 1 hour, if there are no imperfections or bubbles in the wallpaper, we can continue the process. However, at this point, to avoid pattern misalignment, during the continuation process, be careful to use the patterns so that they complement each other without applying adhesive.